Anglia Renewable Energy

The vacuum tube solar panel has been around for over 15 years and has proved to be both reliable and dependable. The vacuum tubes consist of a double wall glass tube (made from strong borosilicate glass i.e. Pyrex) with a space in the centre which contains the heat pipe.

The sun's radiation is absorbed by the selective coating on the inner glass surface, but is prevented from re-radiating out by the silvered innermost lining which has been optimised for infra-red radiation. This acts similarly to a one-way mirror.

This is very efficient; of the sun light's energy hitting the tube's surface, 93% is absorbed, whereas only 7% is lost through reflection and re-emission. The presence of the vacuum wall prevents any losses by conduction or convection - just like a thermos flask. Because of this, the system will work even in very low temperatures.

The heat transferred to the tip of the heat pipe is in turn transferred to a copper manifold in which water circulates to heat the domestic hot water tank. If a tube is placed in direct sunlight on a summer day, the tip temperature can reach 250°C - so the system easily heats domestic hot water cylinders to 60°C even in cooler weather.

The manifold is heavily insulated with a 2" thickness of pre-formed Rockwool to keep the heat in. Unlike flat plates, these headers are so well insulated that they should not require antifreeze in normal operation - the temperature of the header is unlikely to fall below 10°C even in very cold weather.

Our controllers include a low-temperature facility - should the temperature of the collector fall below a defined level, the pump will operate to allow the water at the bottom of the tank to heat the collector slightly. In normal conditions, this would never be necessary, but it acts as a good safety margin. For further information look at our